Concrete Floor Finishes

*a.1.1 Type :

*a.1.2 Brand :

*a.1.3 Origin :

*a.1.4 Type of Joint :

*a.1.5 Conformance to ASTM or other standards

* A.2 Shopdrawings

* B.1 Reference point/ elevations available

* B.2 Waterproofing applied/cured (if required)

* B.3 Sufficient materials on hand to complete placement

* B.4 Clean surface substrate (free from contamination & loose materials)

* B.5 Chipping of substrate for good bonding including adjacent area

* B.6 Adequate reinforcements (where required)

* B.7 Check level of surface

*B.8 Sufficient equipment for the following activities: b.8.1 Leveling

*b.8.2 Floating

*b.8.3 Trowelling

*b.8.4 Reinforcing of corners

* B.9 Proper curing Procedure

* B.10 Consistency of Finish

*C.1

Attachment(s)